Pool boiling on a superhydrophilic surface

摘要

Titanium Dioxide, TiO_2, is a photocatalyst with a unique characteristic. A surface coated with TiO_2 exhibits an extremely high affinity for water when exposed to UV light and the contact angle decreases nearly to zero. Inversely, the contact angle increases when the surface is shielded from UV. This superhydrophilic nature gives a self-cleaning effect to the coated surface and has already been applied to some construction materials, car coatings and so on. We applied this property to the enhancement of boiling heat transfer. An experiment involving the pool boiling of pure water has been performed to make clear the effect of high wettability on heat transfer characteristics. The heat transfer surface is a vertical copper cylinder of 17mm in diameter and the measurement has been done at saturated temperature and in a steady state. Both TiO_2-coated and non-coated surfaces were used for comparison. In the case of the TiO_2-coated surface, it is exposed to UV light for a few hours before experiment and it is found that the maximum heat flux (CHF) is about two times larger than that of the uncoated surface. The temperature at minimum heat flux (MHF) for the superhydrophilic surface is higher by 100K than that for the normal one. The superhydrophilic surface can be an ideal heat transfer surface.