Finite control set predictive control of shunt hybrid power filter

摘要

This paper proposes a finite control set predictive control (FCS-PC) scheme for the shunt hybrid power filter (SHPF) to reduce the power loss while maintaining satisfactory power quality at the utility's grid terminals. By means of the instantaneous power theory, the controller for the proposed method can generate the reference voltage for the SHPF voltage source inverter (VSI) for the future sampling time. Therefore, during a sampling time, the vector of the reference voltage is compared with the finite number of voltage vectors existent in the VSI to select the vector that best fits the cost function of the controller. The proposed method, compared with the conventional pulse width modulation (PWM) carrier method, has the capability of suppressing similarly the harmonic currents at grid terminals and controlling VSI DC-link voltage while maintaining low switching frequencies in the devices. This method shows simplicity in digital implementation because it does not need a PWM block to obtain the VSI gating signals. In addition, a comparison of the proposed FCS-PC method with the conventional carrier-based PWM method is presented and discussed. Parameter errors in the controller are studied and their effects on system performance are explained. The effectiveness of the proposed method is demonstrated with simulation and experimental results during steady-state operation and transient response of the system.