A data-driven approach for fault time determination and fault area location using random matrix theory

摘要

This paper proposes a wide-area measurement-based data-driven approach for fault time determination and fault area location in the power system. To avoid the influence of bad data, the random matrix theory (RMT) is applied to the proposed approach. The measurements obtained from wide-area measurement system (WAMS) are used to form the raw data matrix, its mean spectral radius (MSR) index and the correlation among entries are employed to determine the fault time and locate the fault area using RMT. Since the proposed approach only requires the data obtained from WAMS and is a data-driven method, no physical model and topology information is needed compared with the existing model-based methods. Case studies are carried out on the IEEE 39-bus power system and a practical provincial power grid of China respectively, and a decision-support tool is programmed using the proposed method to help operators obtain fault information more timely and accurately. Simulation results show that the proposed method can determine the fault time precisely and locate the fault line, whether there is bad data in wide-area measurements or not.