Sizing power transformers in power systems planning using thermal rating

摘要

It has already been shown in the literature that power transformers may be more accurately sized by their thermal limits than by their rated power limit. In practice however, thermal limits are usually considered only in operations; but not at planning stage, where the more usual notion of rated power is used. This paper proposes a novel method to take into account (and benefit from) thermal limits directly at planning stage. This is made possible by quantifying separately the impact of each generator and load on the temperature of the distribution transformer. Decoupling the effect of individual generators and loads is achieved by linearizing and rewriting the analytical expression of the hot-spot transformer temperature. The practical value of the method is assessed using a real-world dataset, by estimating the increase in the hosting capacity of the considered transformer for additional generators and loads. Significant gains are obtained when the transformer is sized by generation, in particular when photovoltaic (PV) generators are involved.