Design and Realization of a Dual Wide Band Printed Monopole Antenna for WiFi and WiMAX Systems

摘要

A Printed monopole antenna was designed and manufactured with the wideband performances in two frequency bands. The antenna is compatible with WiMAX and WiFi standards. After reviewing a couple of literatures, the antenna was designed, analyzed and proven for two central frequencies, 2.5 GHz and 5.6 GHz, with much improved bandwidths. Finally, the antenna was manufactured with the overall size of 4 cm × 4.4 cm on Rogers (R04003) substrate. The antenna is made into three L-shaped radiators. A 50 Ω microstrip feed line connects the port to the two L-shaped radiators of different lengths, thus providing two frequency bands. An inverted L-shaped radiator is printed on the less radiation upped side, to tune the antenna for wide band performances. The raised problem was solved with the integral equation solver of the Ansoft high frequency simulator structure (HFSS-IE). Optimal results are presented in this article: the simulation results in comparison with measured results. This antenna prototype's overall dimensions would be readjusted according to any industrial and manufacturing requests.