An electrolytic cleaning process has been used for many years for cleaning metal surfaces prior to galvanic refining processes.The new automatic electrode cleaning "AER" developed by dinotec Water Technology (Germany) makes use of this proven electrolytic process in a greatly improved form, offering the user new benefits. A thorough cleaning of the electrode surface with this process is unfortunately accompanied by an unintended, strong polarisation of the electrode.The disadvantage is that, after the cleaning and depending on the water quality, there is a certain time lag before the correct measured value is reset. It can take an hour or longer until a correct measurement signal is available.The computation algorithms used for an error correction in this case often fail to achieve the desired result.
展开▼
机译:电解清洁工艺在电镀精炼之前已经用于清洁金属表面已有多年的历史。由dinotec Water Technology(德国)开发的新型自动电极清洁“ AER”以一种大大改进的形式利用了这种经过验证的电解工艺,可提供用户的新利益。不幸的是,用这种方法彻底清洁电极表面会导致电极意外,强烈的极化,缺点是在清洁后并根据水质,在正确的测量值达到一定时间之前重启。可能需要一个小时或更长时间才能获得正确的测量信号。在这种情况下,用于纠错的计算算法通常无法获得所需的结果。
展开▼