Quadrature Block for UHF Reflection Coefficient Measurements Using a Directional Coupler and Injection Locking

摘要

The measurement of the radio frequency reflection coefficient is widely used in characterizing various materials nondestructively. Generally, the measurement is done using a one port vector network analyzer together with some sort of probe. Here, the design theory of a new, low-cost replacement for such a network analyzer is explained. The proposed Cartesian reflection coefficient measurement block is outlined as well as the results of computer simulations and measurements on a printed circuit board (PCB) setup. Unlike previous approaches, it explores the use of injection locking to enhance the performance of quadrature amplitude demodulation of both the forward and the reflected waves as sampled from the output path of an ultrahigh-frequency power amplifier by a bidirectional coupler. Computer simulations at 400 MHz resulted in an average error of 3.4 full scale on the reflection coefficient, including extreme impedance values as well as various parasitic effects of the circuit measurements on a simplified PCB setup, also at 400 MHz.