首页> 外文期刊>IEEE Transactions on Vehicular Technology >Symbol Misalignment Estimation in Asynchronous Physical-Layer Network Coding
【24h】

Symbol Misalignment Estimation in Asynchronous Physical-Layer Network Coding

机译:异步物理层网络编码中的符号未对准估计

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Symbol misalignment is inevitable in asynchronous physical-layer network coding (PNC) systems. It is paramount that such symbol misalignment is taken into account in PNC decoding for good performance. Thus, accurate estimation of symbol misalignment is crucial. This paper argues that, when Nyquist pulses (i.e., intersymbol-interference (ISI)-free pulses) are adopted, signal samples only need to be collected at baud rate for optimal symbol misalignment estimation. Based on this principle, we propose a highly accurate symbol misalignment estimation method with low complexity. Our method makes use of the constant amplitude zero autocorrelation sequence (Zadoff–Chu sequence (ZC sequence)). We derive a maximum-likelihood (ML) estimator for symbol misalignment based on the cross-correlation result of the ZC sequence. Unlike previous methods that employ oversampling, our estimation method requires only baud-rate sampling, thus having much lower complexity. Extensive simulations show that our method can accurately estimate both integral and fractional symbol misalignments using sinc pulse and raised-cosine (RC) pulse. The root-mean-square error (RMSE) of the estimation is below 10−2 (in unit of symbol duration) when the SNR is above 15, 18, and 21 dB for 127-, 63-, and 31-bit-length ZC sequences, respectively. Furthermore, our method, being an ML estimation method, has no error floor in the high-SNR regime, whereas the prior methods exhibit an error floor.
机译:在异步物理层网络编码(PNC)系统中,符号未对准是不可避免的。至关重要的是,为了获得良好的性能,PNC解码中应考虑此类符号未对准。因此,准确估计符号未对准至关重要。本文认为,当采用奈奎斯特脉冲(即无符号间干扰(ISI)的脉冲)时,仅需要以波特率收集信号样本即可进行最佳符号未对准估计。基于此原理,我们提出了一种复杂度较低的高精度符号失准估计方法。我们的方法利用了恒定振幅零自相关序列(Zadoff–Chu序列(ZC序列))。我们基于ZC序列的互相关结果,得出符号未对准的最大似然(ML)估计器。与以前采用过采样的方法不同,我们的估计方法仅需要波特率采样,因此复杂度低得多。大量的仿真表明,我们的方法可以使用正弦脉冲和升余弦(RC)脉冲准确估计整数和分数符号未对准。当127位,63位和31位长度的SNR高于15、18和21 dB时,估计的均方根误差(RMSE)低于10-2(以符号持续时间为单位) ZC序列分别。此外,我们的方法(即ML估计方法)在高SNR情况下没有错误底限,而现有方法则表现出错误底限。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号