首页> 外文期刊>IEEE Transactions on Vehicular Technology >A Power-Angle-Spectrum Based Clustering and Tracking Algorithm for Time-Varying Radio Channels
【24h】

A Power-Angle-Spectrum Based Clustering and Tracking Algorithm for Time-Varying Radio Channels

机译:基于功率角频谱的时变无线电信道聚类和跟踪算法

获取原文
获取原文并翻译 | 示例
           

摘要

Radio channel modeling has been an important research topic, since the performance of any communication system depends on channel characteristics. So far, most existing clustering algorithms are conducted based on the multipath components (MPCs) extracted by using a high-resolution parameter estimation approach, e.g., SAGE or MUSIC, etc. However, most of the estimation approaches require prior information to extract MPCs. Moreover, the high-resolution estimation approaches usually result in relatively high complexity, and thus, the clusters can only be identified by using an offline approach after the measurements. Therefore, a power-angle-spectrum (PAS) based clustering and tracking algorithm (PASCT) is proposed in this paper. First, a PAS is extracted from measurement data by using a Bartlett beam-former. For each PAS, the potential targets are selected from the background and separated into clusters by using image processing approaches. The recognized clusters are characterized by the following three attributes: size, position, and shape feature, where an orientation histogram is developed to describe the shape feature of the clusters. Moreover, a cost minimizing tracking approach based on Kuhn-Munkres method is proposed to accurately identify the clusters in non-stationary channels. The proposed PASCT algorithm is validated based on both simulations and measurements. It is found that the dominating clusters in both line-of-sight and non-line-of-sight environments can be well recognized and tracked with the proposed algorithm. By using the proposed algorithm, the dynamic changes of the clusters in real-time channel measurements, e.g., number, birth-death process, and size of the clusters, can be well observed. Through the experiments, the proposed algorithm can achieve fairly good accuracy on the cluster identification with lower complexity compared to the conventional solution.
机译:无线电信道建模一直是重要的研究课题,因为任何通信系统的性能都取决于信道特性。迄今为止,大多数现有的聚类算法都是基于通过使用高分辨率参数估计方法(例如,SAGE或MUSIC等)提取的多径分量(MPC)来进行的。然而,大多数估计方法需要先验信息来提取MPC。而且,高分辨率估计方法通常导致相对较高的复杂度,因此,只能在测量之后通过使用离线方法来识别群集。因此,本文提出了一种基于功率角谱(PAS)的聚类和跟踪算法(PASCT)。首先,使用Bartlett波束形成器从测量数据中提取PAS。对于每个PAS,从潜在背景中选择潜在目标,并使用图像处理方法将其分成簇。识别出的群集具有以下三个属性:大小,位置和形状特征,其中开发了方向直方图来描述群集的形状特征。此外,提出了一种基于库恩-蒙克雷斯(Kuhn-Munkres)方法的成本最小化跟踪方法,以准确识别非平稳信道中的集群。所提出的PASCT算法基于仿真和测量进行了验证。发现使用所提出的算法可以很好地识别和跟踪视线和非视线环境中的主导群集。通过使用所提出的算法,可以很好地观察到群集在实时信道测量中的动态变化,例如数目,出生-死亡过程和群集的大小。通过实验,与常规算法相比,该算法在聚类识别中具有较高的精度,且复杂度较低。

著录项

  • 来源
    《IEEE Transactions on Vehicular Technology》 |2019年第1期|291-305|共15页
  • 作者单位

    Beijing Jiaotong Univ, Sch Comp & Informat Technol, Beijing 100044, Peoples R China;

    Beijing Jiaotong Univ, State Key Lab Rail Traff Control & Safety, Beijing 100044, Peoples R China;

    Beijing Jiaotong Univ, State Key Lab Rail Traff Control & Safety, Beijing 100044, Peoples R China;

    Beijing Jiaotong Univ, State Key Lab Rail Traff Control & Safety, Beijing 100044, Peoples R China;

    Beijing Jiaotong Univ, Sch Comp & Informat Technol, Beijing 100044, Peoples R China;

    Huawei Technol Ltd, Shanghai 210206, Peoples R China;

    Beijing Jiaotong Univ, Sch Comp & Informat Technol, Beijing 100044, Peoples R China;

    Aalto Univ, Dept Radio Sci & Engn, Aalto 00076, Finland;

    Catholic Univ Louvain, Inst Informat & Commun Technol, Elect & Appl Math, B-1348 Louvain La Neuve, Belgium;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Channel measurement and modeling; clustering and tracking analysis; target recognition; multipath component;

    机译:通道测量和建模;聚类和跟踪分析;目标识别;多径组件;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号