...
首页> 外文期刊>Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on >Autonomous corrosion detection in gas pipelines: a hybrid-fuzzy classifier approach using ultrasonic nondestructive evaluation protocols
【24h】

Autonomous corrosion detection in gas pipelines: a hybrid-fuzzy classifier approach using ultrasonic nondestructive evaluation protocols

机译:天然气管道中的自主腐蚀检测:使用超声无损评估协议的混合-模糊分类器方法

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this paper, a customized classifier is presented for the industry-practiced nondestructive evaluation (NDE) protocols using a hybrid-fuzzy inference system (FIS) to classify the corrosion and distinguish it from the geometric defects or normal/healthy state of the steel pipes used in the gas/petroleum industry. The presented system is hybrid in the sense that it utilizes both soft computing through fuzzy set theory, as well as conventional parametric modeling through HȡE; optimization methods. Due to significant uncertainty in the power spectral density of the noise in ultrasonic NDE procedures, the use of optimal H2 estimators for defect characterization is not so accurate. A more appropriate criterion is the HȡE; norm of the estimation error spectrum which is based on minimization of the magnitude of this spectrum and hence produces more robust estimates. A hybrid feature set is developed in this work that corresponds to a) geometric features extracted directly from the raw ultrasonic A-scan data (which are the ultrasonic echo pulses in 1-Dtraveling inside the metal perpendicular to its 2 surfaces) and b) mapped features from the impulse response of the estimated model of the defect waveform under study. An experimental strategy is first outlined, through which the necessary data are collected as A-scans. Then, using the HȡE; estimation approach, a parametric transfer function is obtained for each pulse. In this respect, each A-scan is treated as output from a defining function when a pure/healthy metal''s A-scan is used as its input. Three defining states are considered in the paper; healthy, corroded, and defective, where the defective class represents metal with artificial or other defects. The necessary features are then calculated and are then supplied to the fuzzy inference system as input to be used in the classification. The resulting system has shown excellent corrosion classification wit-nh very low misclassification and false alarm rates.
机译:本文针对混合型推理系统(FIS)提出了针对行业实践的无损评估(NDE)协议的定制分类器,以对腐蚀进行分类并将其与钢管的几何缺陷或正常/健康状态区分开来用于天然气/石油工业。所提出的系统是混合的,因为它既利用模糊集理论进行软计算,又利用基于HȡE的常规参数建模。优化方法。由于超声NDE程序中噪声的功率谱密度存在很大的不确定性,因此使用最佳H2估计量进行缺陷表征不是那么精确。 HȡE是更合适的标准。估计误差谱的范数基于该谱的幅度的最小化,因此产生更可靠的估计。在这项工作中开发了一种混合特征集,它对应于a)直接从原始超声A扫描数据中提取的几何特征(这是在金属内部垂直于其2个表面的1-D方向行进的超声回波脉冲)和b)映射的缺陷波形的估计模型的脉冲响应产生的特征。首先概述了一种实验策略,通过该策略可以收集必要的数据作为A扫描。然后,使用HȡE;估计方法,为每个脉冲获得参数传递函数。在这方面,当将纯/健康金属的A扫描用作其输入时,将每个A扫描视为来自定义函数的输出。本文考虑了三个定义状态。健康,腐蚀和有缺陷的,其中有缺陷的类别表示具有人为或其他缺陷的金属。然后计算必要的特征,然后将其提供给模糊推理系统,作为输入以用于分类。最终的系统显示出极好的腐蚀分类,且分类错误率和误报率极低。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号