...
首页> 外文期刊>Robotics, IEEE Transactions on >Modeling of Transmission Characteristics Across a Cable-Conduit System
【24h】

Modeling of Transmission Characteristics Across a Cable-Conduit System

机译:电缆导管系统中传输特性的建模

获取原文
获取原文并翻译 | 示例

摘要

Many robotic systems, like surgical robots, robotic hands, and exoskeleton robots, use cable passing through conduits to actuate remote instruments. Cable actuation simplifies the design and allows the actuator to be located at a convenient location, away from the end effector. However, nonlinear frictions between the cable and the conduit account for major losses in tension transmission across the cable, and a model is needed to characterize their effects in order to analyze and compensate for them. Although some models have been proposed in the literature, they are lumped parameter based and restricted to the very special case of a single cable with constant conduit curvature and constant pretension across the cable only. This paper proposes a mathematically rigorous distributed parameter model for cable-conduit actuation with any curvature and initial tension profile across the cable. The model, which is described by a set of partial differential equations in the continuous time-domain, is also discretized for the effective numerical simulation of the cable motion and tension transmission across the cable. Unlike the existing lumped-parameter-based models, the resultant discretized model enables one to accurately simulate the partial-moving/partial-sticking cable motion of the cable-conduit actuation with any curvature and initial tension profile. The model is further extended to cable-conduit actuation in pull–pull configuration using a pair of cables. Various simulations results are presented to reveal the unique phenomena like backlash, cable slacking, interaction between the two cables, and other nonlinear behaviors associated with the cable conduits in pull–pull configuration. These results are verified by experiments using two dc motors coupled with a cable-conduit pair. The experimental setup has been prepared to emulate a typical cable-actuated robotic system. Experimental results are compared with the simulations and various implications -n-nare discussed.
机译:许多机器人系统,例如外科手术机器人,机械手和外骨骼机器人,都使用通过导管的电缆来驱动远程仪器。电缆致动简化了设计,并允许将致动器放置在远离末端执行器的便利位置。但是,电缆和导管之间的非线性摩擦会造成电缆上张力传递的主要损失,因此需要一个模型来表征其影响,以便对其进行分析和补偿。尽管在文献中已经提出了一些模型,但是它们是基于集总参数的,并且仅限于具有恒定导管曲率和仅在整个电缆上具有恒定预张力的单根电缆的特殊情况。本文提出了一种数学上严格的分布参数模型,用于在电缆上具有任何曲率和初始张力分布的电缆导管致动。该模型(由连续时域中的一组偏微分方程描述)也被离散化,以进行电缆运动和电缆上的张力传递的有效数值模拟。与现有的基于集总参数的模型不同,最终的离散模型使人们能够准确地模拟具有任何曲率和初始张力分布的电缆管道执行器的部分移动/部分粘住电缆的运动。该模型进一步扩展为使用一对电缆在拉挽式配置中的电缆导管致动。给出了各种模拟结果,以揭示独特的现象,例如反冲,电缆松弛,两条电缆之间的相互作用以及与牵拉配置中的电缆导管相关的其他非线性行为。这些结果通过使用两个直流电机与一对电缆导管耦合的实验进行了验证。实验装置已经准备好模拟典型的电缆驱动机器人系统。实验结果与仿真结果进行了比较,并讨论了各种含义。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号