首页> 外文期刊>IEEE Transactions on Nuclear Science >Improved neutron radiation hardness for Si detectors: application of low resistivity starting material and/or manipulation of N/sub eff/ by selective filling of radiation-induced traps at low temperatures
【24h】

Improved neutron radiation hardness for Si detectors: application of low resistivity starting material and/or manipulation of N/sub eff/ by selective filling of radiation-induced traps at low temperatures

机译:改善Si探测器的中子辐射硬度:通过在低温下选择性填充辐射诱发的陷阱,应用低电阻率的起始材料和/或控制N / sub eff /

获取原文
获取原文并翻译 | 示例
           

摘要

Radiation-induced electrical changes in both space charge region (SCR) of Si detectors and bulk material (BM) have been studied for samples of diodes and resistors made on Si materials with different initial resistivities. The space charge sign inversion fluence (/spl Phi//sub inv/) has been found to increase linearly with the initial doping concentration (the reciprocal of the resistivity), which gives improved radiation hardness to Si detectors fabricated from low resistivity material. The resistivity of the BM, on the other hand, has been observed to increase with the neutron fluence and approach a saturation value in the order of hundreds k/spl Omega/ cm at high fluences, independent of the initial resistivity and material type. However, the fluence (/spl Phi//sub s/), at which the resistivity saturation starts, increases with the initial doping concentrations and the value of /spl Phi//sub s/ is in the same order of that of /spl Phi//sub inv/ for all resistivity samples. Improved radiation hardness can also be achieved by the manipulation of the space charge concentration (N/sub eff/) in SCR, by selective filling and/or freezing at cryogenic temperatures the charge state of radiation-induced traps, to values that will give a much smaller full depletion voltage. Models have been proposed to explain the experimental data.
机译:对于由硅材料制成的具有不同初始电阻率的二极管和电阻器样品,已经研究了Si检测器的空间电荷区(SCR)和块状材料(BM)的辐射诱导的电变化。已经发现,空间电荷符号反转注量(/ spl Phi // sub inv /)随初始掺杂浓度(电阻率的倒数)线性增加,从而提高了由低电阻率材料制成的Si检测器的辐射硬度。另一方面,已观察到BM的电阻率随中子注量而增加,并在高注量时接近数百k / spl Omega / cm的饱和值,而与初始电阻率和材料类型无关。但是,电阻率饱和开始的能量密度(/ spl Phi // sub s /)随着初始掺杂浓度的增加而增加,并且/ spl Phi // sub s /的值与/ spl的值顺序相同所有电阻率样品的Phi // sub inv /。还可以通过控制SCR中的空间电荷浓度(N / sub eff /),在低温下选择性填充和/或冻结辐射诱发阱的电荷状态到可以产生较小的全耗尽电压。已经提出了模型来解释实验数据。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号