Design of Compensated Coupled-Stripline 3-dB Directional Couplers, Phase Shifters, and Magic-T's--Part II: Broadband Coupled-Line Circuits

摘要

The problem of discontinuities in broadband multisection coupled-stripline 3-dB directional couplers, phase shifters, high-pass tapered-line 3-dB directional couplers, and magic-T's, regarding the connections of coupled and terminating signal lines, is comprehensively investigated in this paper for the first time. The equivalent circuit of these discontinuities proposed in Part I has been used for accurate modeling of the broadband multisection and ultra-broadband high-pass coupled-stripline circuits. It has been shown that parasitic reactances, which result from the connections of signal and coupled lines, severely deteriorate the return losses and the isolation of such circuits and also-in case of tapered-line directional couplers--the coupling responses. Moreover, it has been proven theoretically and experimentally that these discontinuity effects can be substantially reduced by introducing compensating shunt capacitances in a number of cross sections of coupled and signal lines. Results of measurements carried out for various designed and manufactured coupled-line circuits have been very promising and have proven the efficiency of the proposed broadband compensation technique. The theoretical and measured data are given for the following coupled-stripline circuits: a decade-bandwidth asymmetric three-section 3-dB directional coupler, a decade-bandwidth three-section phase-shifter compensator, and a high-pass asymmetric tapered-line 3-dB coupler.