首页> 外文期刊>IEEE Transactions on Magnetics >Aging effects on microstructure and GMR in Au-Co and Au-Co-X (X=Cu,Ni,Fe) bulk alloys
【24h】

Aging effects on microstructure and GMR in Au-Co and Au-Co-X (X=Cu,Ni,Fe) bulk alloys

机译:时效对Au-Co和Au-Co-X(X = Cu,Ni,Fe)块状合金的显微组织和GMR的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Aging effects on the microstructure and the GMR in Au-Co and Au-Co-X (X=Fe,Ni,Cu) bulk granular alloys have been investigated. TEM observation shows that Co particles are of plate-like type and grow with the aging time. The optimum size for the maximum MR ratio is a length of about 10 nm and a thickness of 0.6 nm. In Au-Co-X (X=Cu,Ni,Fe) bulk alloys, it was confirmed that the maximum value of the MR ratio is about 3.5% at 10 kOe for Au/sub 80/Co/sub 15/Fe/sub 5/ bulk alloy aged at 300/spl deg/C for 1 hr.
机译:研究了时效对Au-Co和Au-Co-X(X = Fe,Ni,Cu)块状颗粒合金的微观结构和GMR的影响。 TEM观察表明,Co颗粒为板状,并随着时效时间的增长而生长。对于最大MR比的最佳尺寸是大约10nm的长度和0.6nm的厚度。证实在Au-Co-X(X = Cu,Ni,Fe)块状合金中,对于Au / sub 80 / Co / sub 15 / Fe / sub,在10 kOe下MR比的最大值约为3.5%。 5 /散装合金在300 / spl deg / C时效1小时。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号