A Noise-Reduced Light-to-Frequency Converter for Sub-0.1% Perfusion Index Blood SpO_ 2 Sensing

摘要

To improve the SpO(2) sensing system performance for hypoperfusion (low perfusion index) applications, this paper proposes a low-noise light-to-frequency converter scheme from two aspects. First, a low-noise photocurrent buffer is proposed by reducing the amplifier noise floor with a transconductance-boost (g(m)-boost) circuit structure. Second, a digital processing unit of pulse-frequency-duty-cycle modulation is proposed to minimize the quantization noise in the following timer by limiting the maximum output frequency. The proposed light-to-frequency sensor chip is designed and fabricated with a 0.35-mu m CMOS process. The overall chip area is 1 x 0.9 mm(2) and the typical total current consumption is about 1.8 mA from a 3.3-V power supply at room temperature. The measurement results prove the proposed functionality of output pulse duty cycle modulation, while the SNR of a typical 10-kHz output frequency is 59 dB with about 9-dB improvement when compared with the previous design. Among them, 2-3 dB SNR improvement stems from the gm-boosting and the rest comes from the layout design. In-system experimental results show that the minimum measurable PI using the proposed blood SpO(2) sensor could be as low as 0.06% with 2-percentage-point error of SpO(2). The proposed chip is suitable for portable low-power high-performance blood oximeter devices especially for hypoperfusion applications.