The Concept and RELAP5 Model of Thermal-Hydraulic System, Employing a Rapid Condensation for Coolant Circulation

摘要

The rapid condensation event is mostly considered a dangerous and undesirable side effect in thermal-hydraulic systems. This work demonstrates a different viewpoint, where condensation implosion is employed to perform mechanical work. Previous experimental study of the condensation implosion event, briefly presented in this article, showed that condensation implosion can be induced intentionally. These results were used as the basis for further investigations. In this work, a concept of the thermal-hydraulic system has been developed, where condensation-implosions-generated pressure difference could be used as a driving force. Numerical study has been performed to investigate the operation of the developed conceptual thermal-hydraulic system. A thermal-hydraulic computer code RELAP5 was selected for modeling the system operation. The RELAP5 code was found not able to predict the condensation implosion; therefore, a modified heat transfer model was implemented into the code. This modification allowed simulating the condensation implosion artificially in the thermalhydraulic system and modeling the system response to the event. Final results show that a proposed circulation principle is possible and such a thermal-hydraulic system can operate.