首页> 外文期刊>Geotechnical testing journal >Laboratory Test for Evaluating Crack Filling During Internal Erosion in Zoned Dams
【24h】

Laboratory Test for Evaluating Crack Filling During Internal Erosion in Zoned Dams

机译:评估分区大坝内部侵蚀过程中裂缝填充的实验室测试

获取原文
获取原文并翻译 | 示例
           

摘要

A new laboratory test, the crack-filling erosion test (CFET), was developed to study crack filling during the progression of internal erosion in the embankment of zoned dams. Crack filling involves the transport of eroded material from an upstream zone, through a flaw in the core, which is then retained by a downstream granular layer. In the CFET, the specimen comprises a core, an upstream shell material, and a downstream filter layer. These are compacted inside a test apparatus made up of several pieces. The specimen is subjected to water flow through a predrilled hole in the core to simulate a concentrated leak. Seven granular upstream materials, two core soils, and two granular filters are examined. Following an extensive testing program, experimental observations and physical descriptions are presented. Three main types of pattern behaviors are identified: rapid crack filling with almost "no erosion" of the core; filtering after "some erosion" or "excessive erosion" of the core and/or upstream material; and "continuing erosion" of the core and upstream material. When the core has moderate-to-high resistance to erosion, crack filling is mainly governed by grading properties of the upstream zone and of the filter. Crack filling is more likely to occur the finer the filter layer, the higher the fine-sand content of the upstream soil, and the lower the fines content of the upstream soil. Test results are checked against the subjective guidelines on crack-filling action available in the literature.
机译:开发了一种新的实验室测试,即裂缝填充侵蚀测试(CFET),以研究分区大坝路堤内部侵蚀进行过程中的裂缝填充。裂纹填充涉及从上游区域通过芯中的裂纹输送侵蚀的材料,然后将其保留在下游的颗粒层中。在CFET中,样品包括芯,上游壳材料和下游过滤层。将它们压实在由几片组成的测试设备中。使样品流过岩心中的预钻孔,以模拟集中泄漏。检查了七个颗粒状上游物料,两个核心土壤和两个颗粒状过滤器。按照广泛的测试程序,将提供实验观察结果和物理描述。可以识别出三种主要的模式行为:快速填充裂纹,芯几乎“无腐蚀”。在芯和/或上游材料的“某些腐蚀”或“过度腐蚀”之后进行过滤;以及核心和上游材料的“持续侵蚀”。当型芯具有中等到较高的抗腐蚀能力时,裂纹的填充主要取决于上游区域和过滤器的分级特性。过滤层越细,上游土壤的细砂含量越高,上游土壤的细粉含量越低,裂纹就越容易发生。根据文献中提供的关于裂纹填充作用的主观准则检查测试结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号