首页> 外文期刊>Fuel >Micro-scale experimental investigations of multiphase flow in oil-wet carbonates. I. In situ wettability and low-salinity waterflooding
【24h】

Micro-scale experimental investigations of multiphase flow in oil-wet carbonates. I. In situ wettability and low-salinity waterflooding

机译:油湿碳酸盐中多相流的微型实验研究。

获取原文
获取原文并翻译 | 示例
           

摘要

In this study, the impacts of temperature, initial water saturation, and aging time on wettability alteration during dynamic aging process were investigated at the pore scale, using a state-of-the-art high-temperature, high-pressure miniature core-flooding system integrated with a high-resolution micro-CT scanner. Furthermore, pore-scale displacement mechanisms impacting the waterflooding oil recovery under varying oil-wet conditions were probed. Subsequently, we investigated the wettability alteration and its corresponding impact on pore-scale displacement mechanisms during low-salinity waterflooding (LSWF). The results showed that the aging-induced wettability alteration reached an equilibrium condition after approximately seventeen days. With higher temperature, lower initial water saturation, and longer aging time, we observed greater in situ contact angles indicative of more oil-wet rock surfaces. Once brine was injected to displace oil, since the majority of pore elements were oil-wet after the aging process, pore-scale piston-like displacements (brine-to-oil drainage) had the largest contribution to the oil recovery. Based on our observations, the waterflooding-based oil recovery decreases as the porous medium becomes more oil-wet. This phenomenon is due to the higher threshold brine pressures of the displacements in more oil-wet conditions, which restricts brine invasion into medium and small size pores. Furthermore, wettability alteration towards neutral-wetness and the consequent reduction in threshold brine pressure required for the fluid to invade the midsize oil-filled pores, result in higher oil recovery by LSWF compared to high-salinity waterflooding (HSWF). The in situ analyses indicate that reservoirs with wide pore size distributions (a large number of midsize pores) could be better candidates for applications of LSWF EOR technique.
机译:在这项研究中,使用最新的高温,高压微型岩心驱替技术,研究了温度,初始含水饱和度和老化时间对动态老化过程中润湿性变化的影响,并在孔隙尺度上进行了研究。系统与高分辨率micro-CT扫描仪集成在一起。此外,探讨了在不同的油湿条件下影响水驱油采收率的孔隙尺度驱替机制。随后,我们研究了低盐度注水(LSWF)过程中的润湿性变化及其对孔隙尺度位移机制的相应影响。结果表明,老化引起的润湿性变化在约十七天后达到平衡状态。在较高的温度,较低的初始水饱和度和较长的老化时间下,我们观察到较大的原位接触角,表明存在更多的油湿岩石表面。一旦注入盐水以驱替石油,由于老化过程后大多数孔隙元素都被油润湿,因此孔隙尺度的活塞状驱替(盐水向石油的排泄)对石油采收的贡献最大。根据我们的观察,随着多孔介质变得更油湿,水驱油采收率下降。这种现象是由于在更多的油湿条件下,驱替过程中的盐水阈值压力较高,这限制了盐水侵入中等和较小尺寸的孔中。此外,与高盐度注水(HSWF)相比,润湿性向中性润湿性的变化以及随之而来的流体侵入中型充油孔所需的阈值盐水压力降低,导致LSWF的采油率更高。原位分析表明,具有较宽孔径分布(大量中型孔隙)的储层可能是LSWF EOR技术应用的较好候选者。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号