When I set pipe clamps on my workbench or assembly table, the handles run into the benchtop, the clamps tip over sideways, and it's hard to slide the heads with workpieces weighing the pipes down. These sliding clamp supports solve all those problems, creating an adjustable glue-up station that stows easily on a shelf. Made from plywood, with joints rabbeted for alignment and glued together, the long troughs hold simple sliding blocks that cradle the clamp pipes. Sit them atop sawhorses, and the troughs and the sliding blocks are adjustable in every direction. You can use long or short pipe clamps, in any array, for panels, frames, and other common assemblies. The clamp heads slide freely and the handles are unobstructed. When I'm done, I stow the supports on a high shelf and slide the sawhorses out of the way.
展开▼