Synthetic Textile Wastewater Treatment using Potassium Ferrate(Ⅵ)- Application of Taguchi Method for Optimisation of Experiment

摘要

The article attempts to assess the usefulness of the Taguchi method to optimise the purification process of synthetic textile wastewater (pH 6.7 - 7.2, Conductivity = 6.71 - 6.84 mS/cm, Salinity = 3581 - 3648 mg NaCl/l, Colour = 560 - 4710 mg Pt/l, COD = 2220 - 2290 mg O-2/l, TOC = 394 - 551 mg/l) using K2FeO4. The research was conducted using 3 types of wastewater containing, anionic detergent (sodium laurel sulfate, 100 mg/l) and differing only in the concentration of azo dye Acid Green 16 (AG 16). Technical K2FeO4 was used as an oxidiser, which was subjected to physico-chemical analysis (purity, UV-VIS spectrum, surface characteristics and chemical composition using SEAT and EDX methods). For planning and optimising the wastewater treatment process, the Taguchi method was used for four input parameters: pH (2, 7, 12), reaction time (10, 30, 50 min), AG 16 concentrations (20, 120, 220 mgl) and K2FeO4 concentrations (25, 125, 225 mg/l), for which 9 experiments were performed in accordance with the plan adopted. Test result analysis allowed to indicate the optimal values for individual input parameters (pH 2, time = 50 min, AG 16 = 20 mg/l, K2FeO4 = 125 mg/l). Under these conditions, visual discoloration of wastewater was obtained (AG 16 = 0.4 mg/l, down arrow 98%), colour removal (66 mg Pt/l, down arrow 88%) and DOC (249 mgl, down arrow 37%).