Distribution of Bending Stiffness of Orthotropic Fibrous Material Based on an Example of Corrugated Board

摘要

Commonly known methods for calculating the bending stiffness of corrugated board allow to calculate values related to the machine and cross direction of corrugated board but do not allow to calculate bending stiffness in any intermediate direction. The article presents a method for calculating bending stiffness in any direction in the plane of corrugated board, on the basis of the bending stiffness values in the machine and cross direction. Comparing the results of measurements of bending stiffness in selected directions with those of their calculations, the method proposed was verified and its practical usefulness confirmed.