机译:聚氨酯作为用于熔融沉积建模3D打印机的潜在医用级细丝-简要评述
Gdansk Univ Technol, Fac Chem, Dept Polymer Technol, Narutowicza St 11-12, PL-80232 Gdansk, Poland;
Gdansk Univ Technol, Fac Chem, Dept Polymer Technol, Narutowicza St 11-12, PL-80232 Gdansk, Poland;
Gdansk Univ Technol, Fac Chem, Dept Polymer Technol, Narutowicza St 11-12, PL-80232 Gdansk, Poland;
Gdansk Univ Technol, Fac Chem, Dept Polymer Technol, Narutowicza St 11-12, PL-80232 Gdansk, Poland;
medical-grade polyurethanes; filaments; Fused Deposition Modeling (FDM); 3D printing;
机译:聚氨酯作为用于熔融沉积的潜在医用级细丝?对3D打印机建模的简要回顾
机译:全色低成本开源3D打印机的初步研究,基于融合沉积建模(FDM)或熔丝丝制造(FFF)和喷墨印刷的组合
机译:使用带有聚乳酸(PLA)细丝的熔融沉积建模(FDM)3D打印机和二氧化硅纳米颗粒浸涂来制造超疏水表面
机译:采用3D打印件沉积建模(FDM)制造特色原型脚手架的设计与分析
机译:在3D打印的熔融沉积建模中,基于物理的长丝熔化建模。
机译:熔融沉积建模3DP技术的医用TPU柔性细丝的制备与表征
机译:用于应变感应应用的热塑性弹性体复合长丝用熔融沉积建模3D打印机挤出