Physical and mechanical properties of plywood produced with 1.3-dimethylol-4.5-dihydroxyethyleneurea (DMDHEU)-modified veneers of Betula sp. and Fagus sylvatica

摘要

The dimensional stability and some mechanical properties were tested in plywood produced with veneers modified with 1.3-dimethylol-4.5-dihydroxyethyleneurea (DMDHEU). The experimental design included Betula sp. and Fagus sylvatica impregnated with 0.8 M, 1.3 M, and 2.3 M DMDHEU. The plywood consisted of five veneers glued with a phenolic resin. Dimensional stability tests were conducted after 10 cycles of soaking/oven-drying to determine volume changes and anti swelling efficiency (ASE). The mechanical properties tested were hardness (Brinell), modulus of elasticity in bending (MOE), bending strength (BS) and work to maximum load in bending (WMLB). The modified samples for both species were considerably more dimensionally stable than the untreated samples. The samples of Betula sp. and F. sylvatica modified with DMDHEU presented a MOE and a BS unaffected by the treatment. The WMLB was consistently lower in the modified samples than in the unmodified samples. As determined by the Brinell method, the DMDHEU-modified plywood of the Betula sp. and F. sylvatica was harder than the unmodified plywood.