Impact of supersaturation ratio on phosphorus recovery from synthetic anaerobic digester supernatant through a struvite crystallization fluidized bed reactor

摘要

Over the past few decades, several technologies have been developed to recover phosphorus (P) as struvite from wastewater. Although these technologies have achieved reasonable P-removal efficiencies, these technologies are associated with several shortcomings such as high capital and operating costs, longer crystallization time and production of low-quality product. This study focussed on the development of an efficient technology by designing a new fluidized bed reactor (FBR) and determining its optimum operating conditions. The supersaturation ratio is the most important process parameter for struvite recovery. This study exerted effort to establish a range of supersaturation ratios in order to achieve optimum P-removal and recovery with a lesser amount of fine crystals produced. Bench-scale FBR used in this study was able to accomplish 90% P-removal with 18% P-recovery. P-removal efficiency was observed to be increasing with an increase in the initial supersaturation ratio up to a value of 6.5. On the other hand, an increase in the supersaturation ratio resulted in a lower P-recovery efficiency with an increase in fines production. The supersaturation ratio from 5.5 to 6.0 was found to be optimum for efficient operation of the reactor.