首页> 外文期刊>Environmental Technology >Biofiltration for removal of methyl isobutyl ketone (MIBK): Experimental studies and kinetic modelling
【24h】

Biofiltration for removal of methyl isobutyl ketone (MIBK): Experimental studies and kinetic modelling

机译:生物过滤去除甲基异丁基酮(MIBK):实验研究和动力学模型

获取原文
获取原文并翻译 | 示例
       

摘要

The present study deals with the biofiltration of methyl isobutyl ketone (MIBK), which is considered to be a highly toxic volatile organic compound. It is released from the paint and petrochemical industries and is one of the major contributors to air pollution. The biofiltration study was carried out on a lab scale for two months in the presence of acclimated mixed culture. The performance of the biofilter column was evaluated for different inlet loads of MIBK at air flow rates ranging from 0.18 to 0.3 m~3 h~(-1). The maximum removal efficiency of 93% was obtained after 60 days of biofilter operation for an inlet MIBK concentration of 0.45 g m~(-3), and a microbial concentration of 2.36 × 10~8 CFU g~(-1) of packing material was obtained. This led to a study of shock loadings for 20 days, by varying the inlet MIBK load and air flow rate after every five days, to observe the behaviour of the biofilter column in removing sudden loads of MIBK. The biokinetic constants r_(max) and K_s were obtained using the Michaelis-Menten kinetics and were found to be 1.046 g m~(-3) and 0.115 g m~(-3) h~(-1) , respectively, with a coefficient of determination (R~2) of 0.993. The obtained experimental results were validated with the Ottengraf and Van den Oever kinetic model. The critical inlet concentration, critical inlet load and biofilm thickness were also estimated using the results obtained from the model predictions.
机译:本研究涉及甲基异丁基酮(MIBK)的生物过滤,该物质被认为是一种剧毒的挥发性有机化合物。它是从油漆和石化工业中释放出来的,是造成空气污染的主要因素之一。在驯化的混合培养物存在下,以实验室规模进行了两个月的生物过滤研究。在空气流量为0.18至0.3 m〜3 h〜(-1)的情况下,针对MIBK的不同入口负载评估了生物滤池柱的性能。生物滤池运行60天后,入口MIBK浓度为0.45 gm〜(-3)时最大去除效率为93%,填料的微生物浓度为2.36×10〜8 CFU g〜(-1)。获得。通过每隔五天改变进气口MIBK负载和空气流速,就可以研究20天的冲击载荷,以观察生物滤池色谱柱在消除MIBK突然载荷方面的行为。生物动力学常数r_(max)和K_s是通过Michaelis-Menten动力学获得的,分别为1.046 gm〜(-3)和0.115 gm〜(-3)h〜(-1),系数为测定值(R〜2)为0.993。用Ottengraf和Van den Oever动力学模型验证了获得的实验结果。临界入口浓度,临界入口负荷和生物膜厚度也使用从模型预测中获得的结果来估算。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号