Using chemical and isotopic data to quantify ionic trapping of injected carbon dioxide in oil field brines

摘要

Injection of carbon dioxide into depleted oil fields or deep saline aquifers represents one of the most promising means of long-term storage of this greenhouse gas. While the ultimate goal of CO2 injection in the subsurface is mineral storage of CO2 as carbonates, short-term (< 50 year) storage of injected CO2 is most likely to be accomplished by ionic trapping of CO2 as bicarbonate ions (HCO3-) and hydrogeological trapping of molecular CO2. Here, we demonstrate a technique for quantifying ionic trapping of injected CO2 as HCO3- using geochemical data collected prior to and during 40 months of CO2 injection into a hydrocarbon reservoir at the International Energy Agency (IEA) Weyburn CO2 Monitoring and Storage Project, Saskatchewan, Canada. As a result of injection of CO2 with a low carbon isotope ratio (delta C-13 value), fluid and gas samples from four selected production wells showed an increase in HCO3- concentration and a decrease in delta C-13 values of HCO3- and CO2 over the observation period. Isotope and mass balance calculations indicate that, after 40 months of injection, similar to 80% of the HCO3- in the reservoir brines sampled from the four wells formed via dissolution and dissociation of injected CO2. This chemical and isotopic technique should be applicable to CO2 injection and storage in oil fields and in deep saline aquifers, provided there is sufficient carbon isotopic distinction between injected CO2 and baseline aquifer HCO3- and CO2.