...
首页> 外文期刊>Environmental Science & Technology >Meeting the Needs for Released Nanomaterials Required for Further Testing-The SUN Approach
【24h】

Meeting the Needs for Released Nanomaterials Required for Further Testing-The SUN Approach

机译:满足进一步测试所需的释放纳米材料的需求-SUN方法

获取原文
获取原文并翻译 | 示例
           

摘要

The analysis of the potential risks of engineered nanomaterials (ENM) has so far been almost exclusively focused on the pristine, as-produced particles. However, when considering a life-cycle perspective, it is clear that ENM released from genuine products during manufacturing, use, and disposal is far more relevant. Research on the release of materials from nanoproducts is growing and the next necessary step is to investigate the behavior and effects of these released materials in the environment and on humans. Therefore, sufficient amounts of released materials need to be available for further testing. In addition, ENM-free reference materials are needed since many processes not only release ENM but also nanosized fragments from the ENM-containing matrix that may interfere with further tests. The SUN consortium (Project on "Sustainable Nanotechnologies", EU seventh Framework funding) uses methods to characterize and quantify nanomaterials released from composite samples that are exposed to environmental stressors. Here we describe an approach to provide materials in hundreds of gram quantities mimicking actual released materials from coatings and polymer nano-composites by producing what is called "fragmented products" (FP). These FP can further be exposed to environmental conditions (e.g., humidity, light) to produce "weathered fragmented products" (WFP) or can be subjected to a further size fractionation to isolate "sieved fragmented products" (SFP) that are representative for inhalation studies. In this perspective we describe the approach, and the used methods to obtain released materials in amounts large enough to be suitable for further fate and (eco)toxicity testing. We present a case study (nanoparticulate organic pigment in polypropylene) to show exemplarily the procedures used to produce the FP. We present some characterization data of the FP and discuss critically the further potential and the usefulness of the approach we developed.
机译:迄今为止,对工程纳米材料(ENM)的潜在风险的分析几乎完全集中在原始的,制成的颗粒上。但是,从生命周期的角度来看,很明显,在制造,使用和处置过程中从正品中释放出的ENM更为重要。从纳米产品中释放物质的研究正在增长,下一步需要研究的是这些释放的物质在环境和对人类的行为和影响。因此,需要有足够量的释放材料用于进一步测试。此外,由于许多过程不仅会释放ENM,而且会从含ENM的基质中释放出纳米级碎片,因此可能需要进一步的测试,因此需要不含ENM的参考材料。 SUN财团(“可持续纳米技术项目”,欧盟第七框架基金资助)使用方法来表征和量化从暴露于环境压力源的复合样品中释放的纳米材料。在这里,我们描述了一种通过生产所谓的“碎片产品”(FP)提供数百克量的材料的方法,该材料可以模仿涂料和聚合物纳米复合材料中的实际释放材料。这些FP可以进一步暴露于环境条件下(例如,湿度,光线)以产生“风化的碎片产品”(WFP),或者可以进行进一步的尺寸分级以分离出代表吸入的“筛分的碎片产品”(SFP)学习。从这个角度出发,我们描述了该方法以及所用的方法,以获取足够大的释放量的材料,以适合进一步的命运和(生态)毒性测试。我们提出一个案例研究(聚丙烯中的纳米微粒有机颜料)以示例性地显示用于生产FP的程序。我们提供了FP的一些特征数据,并严格讨论了我们开发的方法的进一步潜力和实用性。

著录项

  • 来源
    《Environmental Science & Technology》 |2016年第6期|2747-2753|共7页
  • 作者单位

    Empa, Swiss Federal Laboratories for Materials Science and Technology, CH-9014 St. Gallen, Switzerland;

    Technical University of Denmark, Department of Environmental Engineering, 2800 Kgs. Lyngby, Denmark;

    Empa, Swiss Federal Laboratories for Materials Science and Technology, CH-9014 St. Gallen, Switzerland;

    Technical University of Denmark, Department of Environmental Engineering, 2800 Kgs. Lyngby, Denmark;

    ETSS, CH-7SS8 Strada, Switzerland;

    Technical University of Denmark, Department of Environmental Engineering, 2800 Kgs. Lyngby, Denmark;

    RWTH Aachen University, Institute for Environmental Research, 52074 Aachen, Germany;

    Technical University of Denmark, Department of Environmental Engineering, 2800 Kgs. Lyngby, Denmark;

    RWTH Aachen University, Institute for Environmental Research, 52074 Aachen, Germany;

    University of Vienna, Department of Environmental Geosciences, A-1090 Vienna, Austria;

    BASF SE, Material Physics, D-67056 Ludwigshafen, Germany;

    RIKILT, Wageningen University and Research Centre, Wageningen, Netherlands;

    CEREGE CNRS - IRD - Aix Marseille Universite, 13545 Aix-en-Provence, France;

    RWTH Aachen University, Institute for Environmental Research, 52074 Aachen, Germany;

    CEREGE CNRS - IRD - Aix Marseille Universite, 13545 Aix-en-Provence, France;

    RIKILT, Wageningen University and Research Centre, Wageningen, Netherlands;

    University of Vienna, Department of Environmental Geosciences, A-1090 Vienna, Austria;

    BASF SE, Material Physics, D-67056 Ludwigshafen, Germany;

    RWTH Aachen University, Institute for Environmental Research, 52074 Aachen, Germany;

    Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Venice, Italy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);美国《化学文摘》(CA);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号