Numerical Brazilian split test of pre-cracked granite with randomly distributed micro-components

摘要

PurposeThe purpose of this paper is to investigate the mechanical behavior and propagation of cracks of numerical granite samples through the Brazilian split test and to provide a reference for predicting the behavior of real granite samples.Design/methodology/approachThe numerical models of granite containing two fissures are established using the parallel bond model (PBM) and the smooth joint model (SJM) in PFC2D. The peak stresses, number of cracks and anisotropic ratios are obtained to study the influence of the mineral composition and the angle of inclination of rock bridge on the strength, failure mode and deformation characteristics.FindingsThe numerical results obtained show that the mineral composition has a marginal influence on the peak stress. When the angle of inclination of rock bridge beta increases, the peak stress drops to its minimum value at beta = 90 degrees and then gradually increases to a relatively low level. The behavior of cracks falls into three categories based on the distribution of cracks. By analyzing the stress-strain curve and the process of crack propagation for sample No. 4 with beta = 60 degrees, it is found that the process of failure can be divided into four stages and tensile cracks dominate. The anisotropic ratios of peak stress and a number of cracks obtained show that the peak stress is low anisotropic and the number of cracks is medium anisotropic.Originality/valueThis paper presents a numerical simulation method to analyze mechanical behavior and propagation of cracks under different conditions. The proposed method and the results obtained are useful for predicting the behavior of real granite samples in laboratory and engineering projects.