首页> 外文期刊>Energy >Parametric study of a hybrid one column air separation unit (ASU) and CO2 power cycle based on advanced exergy cost analysis results
【24h】

Parametric study of a hybrid one column air separation unit (ASU) and CO2 power cycle based on advanced exergy cost analysis results

机译:基于高级火用成本分析结果的混合式一塔空气分离装置(ASU)和CO2功率循环的参数研究

获取原文
获取原文并翻译 | 示例
           

摘要

In this study advanced exergy and exergoeconomic analyses are performed on the integrated cryogenic air separation unit (ASU), oxy-fuel carbon dioxide power cycle and LNG vaporization process. Advanced exergy results show that endogenous part of exergy destruction is more than exogenous part which means interactions between the process components is not significant CR-4 compressor with 190,095 kW exogenous exergy destruction rate has the highest share of this type of exergy destruction among the process components. Advanced exergoeconomic analysis results show that interactions between the process components are weak. That is because of large values of endogenous part towards the exogenous part. Among investigated process components unavoidable exergy destruction cost rate of heat exchanger (H-1) and combustion chamber is higher than the avoidable part. Avoidable/endogenous exergy destruction cost rate of P-1, CR-1 and H-8 components is the highest and consequently these elements will have the highest priority for the optimization. The capital investment and operating and maintenance cost rate of pump (P-1) is 10,018 $/h. This value reveals that saving the money from the operating and maintenance costs will make up the replacement cost of this component with the high-tech ones. Based on the parametric analysis, the optimum design parameters of pump (P-1), compressor (CR-1) and heat exchanger (H-8) are eta(is) = 82%, r(p) = 6.195 and Delta T-min = 2K, respectively. (C) 2017 Elsevier Ltd. All rights reserved.
机译:在这项研究中,对集成式低温空气分离装置(ASU),含氧燃料二氧化碳动力循环和LNG气化过程进行了高级的(火用)和用能经济分析。先进的火用结果表明,火用破坏的内源性部分超过了火用部分,这意味着过程组件之间的相互作用并不显着。190,095 kW的CR-4压缩机外在火用破坏率在过程组件中占此类火用破坏的最大份额。先进的能效经济学分析结果表明,过程组件之间的交互作用较弱。那是因为内源性部分相对于外源性部分的价值很大。在研究过程中,不可避免的热交换器(H-1)和燃烧室的火用破坏成本率高于可避免部分。 P-1,CR-1和H-8组分的可避免/内源于火用破坏成本比率最高,因此,这些元素在优化中具有最高优先级。泵(P-1)的资本投资和运行维护成本率为10018美元/小时。该值表明,从运营和维护成本中节省的钱将弥补该组件用高科技组件的更换成本。基于参数分析,泵(P-1),压缩机(CR-1)和热交换器(H-8)的最佳设计参数为eta(is)= 82%,r(p)= 6.195和Delta T -min = 2K。 (C)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号