...
首页> 外文期刊>Energy & fuels >Comprehensive Kinetic Modeling Study of Bio-oil Formation from Fast Pyrolysis of Biomass
【24h】

Comprehensive Kinetic Modeling Study of Bio-oil Formation from Fast Pyrolysis of Biomass

机译:生物质快速热解形成生物油的综合动力学模型研究

获取原文
获取原文并翻译 | 示例

摘要

The aim of this work is to analyze the optimal operating conditions for fast biomass pyrolysis. The operating conditions required to maximize the yield of liquid products are investigated and discussed on the basis of a comprehensive mathematical model of wood/biomass devolatilization. Crucial issues are the fast and complete heating of biomass particles to reduce char formation and the rapid cooling of released products to reduce the role of secondary gas-phase pyrolysis reactions. Chemical kinetics as well as heat- and mass-transfer phenomena play an important role in this process; thus, a comprehensive kinetic model is applied. The proposed model, when compared to the majority of other devolatilization models, attempts to characterize pyrolysis reactions with a lumped stoichiometry using a limited number of equivalent components to describe not only gaseous products but also tar species. Model predictions are compared to experimental measurements not only with further validation in mind but also principally to verify the reliability of this comprehensive kinetic model of biomass devolatilization and combustion.
机译:这项工作的目的是分析快速生物质热解的最佳操作条件。在木材/生物质脱挥发分的综合数学模型的基础上,研究和讨论了最大化液体产品产量所需的操作条件。至关重要的问题是对生物质颗粒进行快速而完全的加热以减少炭的形成,并快速冷却释放出的产物以减少二次气相热解反应的作用。在此过程中,化学动力学以及传热和传质现象起着重要作用。因此,应用了综合动力学模型。与大多数其他脱挥发分模型相比,所提出的模型试图以集总化学计量来表征热解反应,使用有限数量的等效组分来描述气态产物和焦油物质。将模型预测结果与实验测量结果进行比较,不仅考虑了进一步的验证,而且主要是为了验证生物质挥发和燃烧这一综合动力学模型的可靠性。

著录项

  • 来源
    《Energy & fuels》 |2010年第sepaaocta期|p.5727-5734|共8页
  • 作者单位

    Dipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

    rnDipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

    rnDipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

    rnDipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

    rnDipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

    rnDipartimento di Chimica, Materiali e Ingegneria Chimica, Politecnico di Milano, 20131 Milano, Italy;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号