Poly(3,4-ethylenedioxythiphene) (PEDOT)-Modified Anodes: Reduced Methanol Crossover in Direct Methanol Fuel Cells

摘要

A new method to reduce methanol crossover in fuel cells is presented. This approach relies on coating an anode gas diffusion layer with poly(3,4-ethylenedioxythiophene), which is achieved by an electropolymer-ization method. Methanol permeability through commercially available gas diffusion layers was reduced from 4.5 × 10~(-5) to as low as 1.8 × 10~(-6)cm~2s~(-1). The use of the polymer increased the specific resistance from 0.07 to as high as 2.5 Q cm~2. Fuel cell testing demonstrated a positive shift in cell voltage of about 70 mV in the low current density region of the polarization curves.