Alkanes Induced Asphaltene Precipitation Studies at High Pressure and Temperature in the Presence of Argon

摘要

The continuous increase of petroleum production under adverse subsea conditions and the preeminent need for adequate operational conditions and efficient use of additives to warrant flow assurance makes it interesting to set up experimenfal procedures to carry out n-alkane precipitation studies under high-pressure (p) and high-temperature (T) conditions. In this contribution, some preliminary experimental studies developed to characterize asphaltene precipitation in model systems consisting of asphaltene solutions in toluene or mixtures of hydrocarbons by the addition of propane, n-heptane, or other alkanes at various pressures and temperatures, using a commercial compact equipment, are reported. In general terms, it was established that these tests follow the same pattern described at ambient p and T conditions and the one single study reported in the literature for a stock tank oil sample at 3000 psi and room T. Four crude oils of different characteristics were tested, using diluted or undiluted samples, and it was possible to detect the asphaltene precipitation onset. However, these results cannot be used to infer the stability of the crude oils because results correlating onset and stability at high p and T are not yet available. The effect of pressure at high pressures was not entirely resolved because argon, used as an assumed inert gas to pressurize the system, dissolves in the hydrocarbons and displaces the precipitation onset toward lower values. The need to develop compact equipment to assess the effect of solvents, inhibitors, and other additives on the phase behavior of crude oil at high pressure and temperature and in the presence of CO2 and other gases, representing a valuable contribution to the petroleum industry in the area of flow assurance, still persists.