首页> 外文期刊>Energy Conversion & Management >Development of advanced nuclear fuel cycle system 'flexible fuel cycle initiative' for LWR and FBR
【24h】

Development of advanced nuclear fuel cycle system 'flexible fuel cycle initiative' for LWR and FBR

机译:为轻水堆和自由堆开发先进的核燃料循环系统“灵活的燃料循环倡议”

获取原文
获取原文并翻译 | 示例
           

摘要

The transition from light water reactors (LWR) to fast breeder reactors (FBR) is indispensable for sustainable nuclear electricity supply but has various unpredictable factors such as introduction speed and time of FBR. In order to manage these unpredictable factors, the authors propose advanced fuel cycle system which consists of LWR spent fuel reprocessing (uranium removal) and FBR spent fuel reprocessing and fabrication. LWR fuel reprocessing only carries out about 90% uranium removal from LWR spent fuel, then the composition of remaining spent fuel (recycle material) is about 50% uranium, 15% plutonium and 35% fission products + minor actinides. Recycle material is transferred to FBR spent fuel reprocessing to recover plutonium and uranium followed by mixed oxide (MOX) fuel fabrication for FBR. Depending on the introduction time of FBR, recycle material (about 1/10 volume of original LWR spent fuel) may be stored until the construction of FBR. The proposed fuel cycle system called "flexible fuel cycle initiative (FFCI)" has some characteristics compared with ordinary (reference) system which consists of full reprocessing facilities of LWR and FBR spent fuels, that is smaller LWR reprocessing facility, higher plutonium content in recycle material for FBR, compact storage volume of recycle material with high proliferation resistance in case of FBR introduction delay. By the evaluation of several transition scenarios from LWR to FBR, the FFCI system was clarified to supply enough and no surplus plutonium for FBR.
机译:从轻水反应堆(LWR)到快速增殖反应堆(FBR)的过渡对于可持续的核电供应是必不可少的,但具有各种不可预测的因素,例如FBR的引入速度和时间。为了管理这些不可预测的因素,作者提出了一种先进的燃料循环系统,该系统包括轻水堆乏燃料后​​处理(铀去除)和FBR乏燃料后处理和制造。轻水堆燃料的后处理仅能从轻水堆乏燃料中去除约90%的铀,然后剩余的乏燃料(循环材料)的成分约为50%铀,15%and和35%裂变产物+少量act系元素。将回收材料转移到FBR乏燃料的后处理中,以回收p和铀,然后制造FBR的混合氧化物(MOX)燃料。取决于FBR的引入时间,可以存储循环材料(大约LWR原始燃料的1/10体积),直到FBR的构造。与普通(参考)系统相比,拟议的燃料循环系统称为“灵活燃料循环倡议(FFCI)”,该系统具有由轻水堆和FBR乏燃料的完整后处理设施组成的常规(参考)系统,即轻水堆后处理设施较小,循环中p含量较高用于FBR的材料,在FBR引入延迟的情况下,紧凑的回收材料的存储容量具有较高的抗扩散性。通过评估从轻水堆到FBR的几种过渡方案,可以明确FFCI系统可以为FB​​R提供足够的and,而不会提供过量的p。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号