首页> 外文期刊>Energy Conversion & Management >Experimental investigation of a multi-stage humidification-dehumidification desalination system heated directly by a cylindrical Fresnel lens solar concentrator
【24h】

Experimental investigation of a multi-stage humidification-dehumidification desalination system heated directly by a cylindrical Fresnel lens solar concentrator

机译:圆柱形菲涅耳透镜太阳能聚光器直接加热的多级加湿除湿淡化系统的实验研究

获取原文
获取原文并翻译 | 示例
           

摘要

This study demonstrates a multi-stage humidification-dehumidification (HDH) solar desalination system heated directly by a cylindrical Fresnel lens concentrator. In this novel system, the solar radiation is sent directly into desalination unit. That is to say, the solar receiver and the evaporator of the system are a whole in which the black fillers in seawater directly absorb the concentrated solar lights to heat the seawater film to produce the evaporation. The configuration and working processes of the proposed design are described in detail. In order to analyze its performance, a small solar desalination prototype unit incorporated with a cylindrical Fresnel lens concentrator was designed and built in our laboratory. Using three-stage isothermal tandem heating mode, the variation of the fresh water yield rate and the absorber temperature with time were measured experimentally and were compared with theoretical calculations. The experimental results show that the maximum yield of the unit is about 3.4 kg/h, the maximum gained output ratio (GOR) is about 2.1, when the average intensity of solar radiation is about 867 W/m(2). This study indicates that the proposed system has the characteristics of compact structure and GOR high. It still can be improved when the design and operation are optimized further. (C) 2017 Elsevier Ltd. All rights reserved.
机译:这项研究表明,多级加湿-除湿(HDH)太阳能脱盐系统由圆柱菲涅尔透镜聚光器直接加热。在这个新颖的系统中,太阳辐射被直接发送到脱盐装置中。也就是说,系统的太阳能接收器和蒸发器是一个整体,其中海水中的黑色填充物直接吸收集中的太阳光以加热海水膜以产生蒸发。详细描述了建议设计的配置和工作过程。为了分析其性能,在我们的实验室中设计并建造了一个装有圆柱形菲涅耳透镜聚光器的小型太阳能脱盐原型设备。采用三阶段等温串联加热方式,实验测量了淡水产率和吸收塔温度随时间的变化,并与理论计算进行了比较。实验结果表明,当太阳辐射的平均强度约为867 W / m(2)时,该装置的最大产量约为3.4 kg / h,最大获得的输出比(GOR)约为2.1。研究表明,提出的系统具有结构紧凑,GOR高的特点。当进一步优化设计和操作时,仍可以改进。 (C)2017 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号