【24h】

Authentication with 3D Pattern Communication

机译:通过3D模式通信进行身份验证

获取原文
获取原文并翻译 | 示例
           

摘要

This paper proposes an authentication technique by 3D pattern communication, using terminals with a small-sized screen. 3D pattern communication is a method whereby an arbitrary signal can be transmitted by rewriting the signal patterns on the screen for several times on the terminal screen. The signal is not limited by the display resolution of the screen or the kind of liquid crystal. Consequently, any signal can be sent to the destination through the screen, and secure authentication can be realized by using a portable terminal. It is verified that, even if the terminal is inclined to some extent during reading due to the angle of the hand holding the terminal, or an arbitrary picture is overlaid on the pattern, the 3D pattern can be recognized correctly by utilizing error-correcting code and interleaving. The proposed scheme is implemented on current models of portable phones with TFT, TFD, STN, and organic EL screens. The communication of 1024-bit RSA signature data is successfully performed in 0.33 to 0.44 second, except for a single terminal. Using the proposed 3D pattern communication, an authentication service with a strong security requirement can be provided without adding a special device to existing portable phone terminals.
机译:本文提出了一种使用3D模式通信的认证技术,该技术使用具有小屏幕的终端。 3D模式通信是一种方法,通过在终端屏幕上多次重写屏幕上的信号模式,可以发送任意信号。信号不受屏幕显示分辨率或液晶种类的限制。因此,可以通过屏幕将任何信号发送到目的地,并且可以通过使用便携式终端来实现安全认证。可以确认,即使在读取过程中由于握住终端的手的角度使终端倾斜了某种程度,或者在图案上覆盖了任意图片,也可以利用纠错码正确识别3D图案和交错。所提议的方案在具有TFT,TFD,STN和有机EL屏幕的便携式电话的当前模型上实现。除单个终端外,1024位RSA签名数据的通信在0.33至0.44秒内成功完成。使用所提出的3D模式通信,可以提供具有强安全性要求的认证服务,而无需在现有的便携式电话终端上添加特殊设备。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号