Testing Sprinkler-Pipe Seismic-Braee Components

摘要

The design codes and standards (e.g., UBC, IBC, NFPA-13) estimate the amplitude of the seismic load in sprinkler-pipe braces, but they do not specify the number of cycles for which this load must be resisted by various components of pipe braces. Because the components can fail in low-cycle fatigue, the number of load cycles must be considered in establishing the strength of the brace components. The first part of this study deals with determining the number of cycles for which a component must resist its rated capacity. Strong-motion records from 18 strongly shaken buildings were incorporated into a low-cycle fatigue model to develop a test criterion for measuring the seismic strength of brace components. In the second part of this study, a series of tests were conducted to gain insight into the cyclic behavior of brace components. Finally, a test protocol was established to measure the seismic strength of brace components. With some modifications, the protocol can be applied to many other nonstructural components.