Towards multiple hazard resilient bridges: a methodology for modeling frequent and infrequent time-varying loads Part II, Examples for live and earthquake load effects

摘要

The current AASHTO load and resistance factor design (LRFD) guidelines are formulated based on bridge reliability, which interprets traditional design safety factors into more rigorously deduced factors based on the theory of probability. This is a major advancement in bridge design specifications. However, LRFD is only calibrated for dead and live loads. In cases when extreme loads are significant, they need to be individually assessed. Combining regular loads with extreme loads has been a major challenge, mainly because the extreme loads are time variable and cannot be directly combined with time invariant loads to formulate the probability of structural failure. To overcome these difficulties, this paper suggests a methodology of comprehensive reliability, by introducing the concept of partial failure probability to separate the loads so that each individual load combination under a certain condition can be approximated as time invariant. Based on these conditions, the extreme loads (also referred to as multiple hazard or MH loads) can be broken down into single effects. In this paper, a further breakdown of these conditional occurrence probabilities into pure conditions is discussed by using a live truck and earthquake loads on a bridge as an example.