A method of calculating the non-linear seismic response of a building braced with viscoelastic dampers

摘要

Buildings are continually subject to dynamic loads, such as wind load, seismic ground motion, and even the load from internal utility machines. The recent trend of constructing more flexible high-rise buildings underscores the importance of including viscoelastic dampers in building designs. Viscoelastic dampers are used to control the dynamic response of a building. If the seismic design is based only on the linear response spectrum, considerable error may occur when calculating the seismic response of a building; rubber viscoelastic dampers show non-linear hysteretic damping that is quite different from viscous damping. This study generated a non-linear response spectrum using a non-linear oscillator model to simulate a building with viscoelastic dampers installed. The parameters used in the non-linear damper model were obtained experimentally from dynamic loading tests. The results show that viscoelastic dampers effectively reduce the seismic displacement response of a structure, but transmit more seismic force to the structure, which essentially increases its seismic acceleration response.