Effects of laser triggering parameters on runtime and jitter of a gas switch

摘要

Parameters affecting the runtime and jitter of a laser triggered gas switch have been studied. Experiments tested a variety of switch parameters including percentage of selfbreak and switch pressure. The effects of laser beam parameters were also considered, including focal length, laser energy, laser spark length, and laser wavelength. Experiments were performed on the Tiger pulsed power machine. Measurements were taken on a spark gap switch built from the trigger section of a Rimfire switch. A Marx bank consisting of 32, 3.1 uF, capacitors that fed into a 7 nF intermediate storage capacitor was used to drive the switch into a 4 ¿ resistive load. The test switch was pressurized to 306 kPa (30 psig) with SF6 and operated near 1 MV. A New Wave Tempest Nd:YAG laser was used to trigger breakdown of the switch. The laser was focused at the mid-gap between the switch electrodes using lenses with focal lengths between 30 cm and 100 cm. Focused laser energy in the switch ranged from <5 mJ to 80 mJ. The effects of switch and laser beam parameters on the runtime and jitter of a laser triggered gas switch are presented. The end goal of the research is to determine optimal conditions for improved switch performance.