Process Study on Surface Modification of Coral Hydroxyapatite

摘要

Objective: To explore process of modifying coral hydroxyapatite by nmZnO under different conditions, the final plan is to develop a porous artificial bone composite that combines the antibacterial properties of nano zinc oxide with the porous biodegradability of coral hydroxyapatite. Methods: Coral hydroxyapatite was modified by zinc nitrate sol-gel method at 70 in weak acid environment. White granular porous composite materials were obtained by ultrasonic, rotary stirring, drying and calcination. The composition of the composite material is analyzed using X-ray diffractomer (XRD), using scanning electron microscopy (SEM) to observe and analyze changes in the surface appearance of composite materials, using energy dispersive X-ray spectroscopy (EDX) to observe and analyze the composition of the composite surface, the results of thermogravimetric analysis were used to study the decomposition temperature and other characteristics of the composite. Results: The sol-gel method can be used for antibacterial modification on CHA surface. When the mass ratio of coral hydroxyapatite, zinc nitrate and PEG-6000 is 48:4:5, the particle size and distribution of nano-zinc oxide particles are ideal, and uniformly distributed spherical ZnO nanoparticles can be observed under scanning electron microscopy. Conclusion: Coral hydroxyapatite surface could be modified by zinc nitrate sol-gel method. The particle size of nano zinc oxide is less than 100 nanometers. The agglomeration problem of nano-particles is solved; the porous structure of CHA are not destroyed.