Gas density distribution in a clustered-gas jet produced from a supersonic slit nozzle under high backing pressure

摘要

A gas jet produced by adiabatic expansion of gas through a slit nozzle into a vacuum has been served as a target in the study of high harmonic generation or laser wakefield electron acceleration. In this work, Mach–Zehnder interferometry was utilized to obtain the gas density distribution in an argon cluster gas jet produced from a supersonic slit nozzle. The interference fringe distortion caused by the gas jet along the slit width under high backing pressure was recorded and inverted to a gas density profile. The gas backing pressure was up to 80 bars to obtain a gas jet with a higher density. It is found that the gas density in the jet is not uniform along the width direction of the slit nozzle and is the highest at the center of the jet. Along the gas jet, the highest gas density roughly decreases linearly. However, a steep density gradient is observed at P 0 = 60–80 bars. Meanwhile, the highest gas density depends linearly on the gas backing pressure and the degree of dependence gradually decreases along the gas jet.