...
首页> 外文期刊>Atmospheric Measurement Techniques Discussions >Suitability of fibre-optic distributed temperature sensing for revealing mixing processes and higher-order moments at the forest–air interface
【24h】

Suitability of fibre-optic distributed temperature sensing for revealing mixing processes and higher-order moments at the forest–air interface

机译:光纤分布式温度感测的适用性,用于揭示森林空中界面在森林 - 空中界面处的混合过程和高阶矩

获取原文

摘要

The suitability of a fibre-optic distributed temperature sensing (DTS) technique for observing atmospheric mixing profiles within and above a forest was quantified, and these profiles were analysed. The spatially continuous observations were made at a 125?m tall mast in a boreal pine forest. Airflows near forest canopies diverge from typical boundary layer flows due to the influence of roughness elements (i.e. trees) on the flow. Ideally, these complex flows should be studied with spatially continuous measurements, yet such measurements are not feasible with conventional micrometeorological measurements with, for example, sonic anemometers. Hence, the suitability of DTS measurements for studying canopy flows was assessed. The DTS measurements were able to discern continuous profiles of turbulent fluctuations and mean values of air temperature along the mast, providing information about mixing processes (e.g. canopy eddies and evolution of inversion layers at night) and up to third-order turbulence statistics across the forest–atmosphere interface. Turbulence measurements with 3D sonic anemometers and Doppler lidar at the site were also utilised in this analysis. The continuous profiles for turbulence statistics were in line with prior studies made at wind tunnels and large eddy simulations for canopy flows. The DTS measurements contained a significant noise component which was, however, quantified, and its effect on turbulence statistics was accounted for. Underestimation of air temperature fluctuations at high frequencies caused 20?%–30?% underestimation of temperature variance at typical flow conditions. Despite these limitations, the DTS measurements should prove useful also in other studies concentrating on flows near roughness elements and/or non-stationary periods, since the measurements revealed spatio-temporal patterns of the flow which were not possible to be discerned from single point measurements fixed in space.
机译:纤维 - 光学分布式温度感测(DTS)技术用于观察森林内和上方森林内部和上方的常压混合型材的适用性,分析了这些曲线。在北方松树林中的125架高桅杆上进行了空间连续的观察。由于粗糙度元素(即树)对流动的影响,森林檐篷附近的气流来自典型的边界层流动。理想地,应在空间连续测量中研究这些复杂的流量,但是这种测量与传统的微气象测量不可行,例如声音风光测量仪。因此,评估了研究冠层流量的DTS测量的适用性。 DTS测量能够识别阵风的湍流波动和平均空气温度的平均值的连续曲线,提供有关混合过程的信息(例如,夜间的逆变层和反转层的演变)以及森林中的三阶湍流统计数据-AtmoSphere接口。在该分析中,还利用了3D SONC风光测量仪和位点的多普勒LIDAR的湍流测量。湍流统计的连续曲线符合在风隧道和大型涡流流动模拟的先前研究。 DTS测量含有显着的噪声分量,但是,量化了,其对湍流统计数据的影响被占了。低估高频的空气温度波动引起的20?% - 30?%在典型流动条件下低估温度方差。尽管有这些局限性,DTS测量也应该在集中在粗糙度元件和/或非静止时段附近流动的其他研究中证明是有用的,因为测量显示了从单点测量中不可能辨别的流动的时空模式固定在太空中。

著录项

相似文献

  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号