...
首页> 外文期刊>Atmospheric Measurement Techniques Discussions >Photocurrent modelling and experimental confirmation for meteoric smoke particle detectors on board atmospheric sounding rockets
【24h】

Photocurrent modelling and experimental confirmation for meteoric smoke particle detectors on board atmospheric sounding rockets

机译:船舶探测火箭船上烟雾颗粒探测器的光电流建模与实验证实

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Characterising the photoelectron current induced by the Sun's UV radiation is crucial to ensure accurate daylight measurements from particle detectors. This article lays out the methodology used to address this problem in the case of the meteoric smoke particle detectors (MSPDs), developed by the Leibniz Institute of Atmospheric Physics in Kühlungsborn (IAP) and flown on board the PMWEs (Polar Mesosphere Winter Echoes) sounding rockets in April?2018. The methodology focuses on two complementary aspects: modelling and experimental measurements. A detailed model of the MSPD photocurrent was created based on the expected solar UV flux, the atmospheric UV absorption as a function of height by molecular oxygen and ozone, the photoelectric yield of the material coating the MSPD as a function of wavelength, the index of refraction of these materials as a function of wavelength and the angle of incidence of the illumination onto the MSPD. Due to its complex structure, composed of a central electrode shielded by two concentric grids, extensive ray-tracing calculations were conducted to obtain the incidence angles of the illumination on the central electrode, and this was done for various orientations of the MSPD in respect to the Sun. Results of the modelled photocurrent at different heights and for different materials, as well as for different orientations of the detector, are presented. As a pre-flight confirmation, the model was used to reproduce the experimental measurements conducted by Robertson et?al. (2014) and agrees within an order of magnitude. An experimental setup for the calibration of the MSPD photocurrent is also presented. The photocurrent induced by the Lyman-alpha line from a deuterium lamp was recorded inside a vacuum chamber using a narrowband filter, while a UV-sensitive photodiode was used to monitor the UV flux. These measurements were compared with the model prediction, and also matched within an order of magnitude. Although precisely modelling the photocurrent is a challenging task, this article quantitatively improved the understanding of the photocurrent on the MSPD and discusses possible strategies to untangle the meteoric smoke particles (MSPs) current from the photocurrent recorded in-flight.
机译:表征由Sun的UV辐射引起的光电子电流是至关重要的,以确保粒子检测器精确的日光测量。本文阐述了用于解决这一问题的方法,以解决由Kühlungsborn(IAP)的大型大气物理学研究所和PMWES(极地介质冬季回声)发出船上的Leibniz大气物理学研究所开发的情况(MSPD)。 4月的火箭队2018年。该方法侧重于两个互补方面:建模和实验测量。基于预期的太阳能UV助焊剂,作为高度的函数,由分子氧和臭氧的函数,将MSPD的光电产量作为波长的函数,作为波长的函数的光电产率,是产生的详细模型。这些材料的折射是波长的函数和照射到MSPD上的发生率。由于其复杂结构,由由两个同心网格屏蔽的中心电极组成,进行了广泛的迂回计算,以获得中央电极上的照明的入射角,这是针对MSPD的各种取向完成的太阳。提出了不同高度和不同材料的模型光电流的结果,以及检测器的不同取向。作为飞行前的确认,该模型用于再现由Robertson等人进行的实验测量。 (2014)并在一个数量级内同意。还提出了用于校准MSPD光电流的实验装置。使用窄带过滤器在真空室内记录由氘灯的Lyman-α线引起的光电流,而UV敏感光电二极管用于监测UV通量。将这些测量值与模型预测进行比较,并且在幅度范围内也匹配。虽然精确地建模光电流是一个具有挑战性的任务,但是本文的定量改善了对MSPD上的光电流的理解,并讨论了从飞行中记录的光电流中的移动烟雾(MSP)电流的可能策略。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号