首页> 外文期刊>Atmospheric Chemistry and Physics Discussions >Chemical characterization and stable carbon isotopic composition of particulate Polycyclic Aromatic Hydrocarbons issued from combustion of 10 Mediterranean woods
【24h】

Chemical characterization and stable carbon isotopic composition of particulate Polycyclic Aromatic Hydrocarbons issued from combustion of 10 Mediterranean woods

机译:10位地中海林燃烧颗粒多环芳烃的化学表征及稳定碳同位素组成

获取原文
           

摘要

The objectives of this study were to characterize polycyclic aromatic hydrocarbons from particulate matter emitted during wood combustion and to determine, for the first time, the isotopic signature of PAHs from nine wood species and Moroccan coal from the Mediterranean Basin. In order to differentiate sources of particulate-PAHs, molecular and isotopic measurements of PAHs were performed on the set of wood samples for a large panel of compounds. Molecular profiles and diagnostic ratios were measured by gas chromatography/mass spectrometry (GC/MS) and molecular isotopic compositions (δ13C) of particulate-PAHs were determined by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS). Wood species present similar molecular profiles with benz(a)anthracene and chrysene as dominant PAHs, whereas levels of concentrations range from 1.8 to 11.4 mg g?1 OC (sum of PAHs). Diagnostic ratios are consistent with reference ratios from literature but are not sufficient to differentiate the species of woods. Concerning isotopic methodology, PAH molecular isotopic compositions are specific for each species and contrary to molecular fingerprints, significant variations of δ13C are observed for the panel of PAHs. This work allows differentiating wood combustion (with δ13CPAH = ?28.7 to ?26.6) from others origins of particulate matter (like vehicular exhaust) using isotopic measurements but also confirms the necessity to investigate source characterisation at the emission in order to help and complete source assessment models. These first results on woodburnings will be useful for the isotopic approach to source tracking.
机译:这项研究的目的是从木材燃烧过程中排放的颗粒物表征多环芳烃,并确定,第一次,多环芳烃的九个木种和摩洛哥煤炭从地中海盆地同位素特征。为了颗粒的多环芳烃,分化的来源多环芳烃的分子和同位素测量在该组木材样品的用于化合物的大型面板进行。分子概况和诊断比率通过气相色谱/质谱(GC / MS)和颗粒-多环芳烃分子同位素组成(δ13 C)测量用气相色谱法/燃烧/同位素比率质谱仪(GC / C / IRMS)来确定。木种本类似的分子型材苯并(A)蒽和苯并菲作为主导多环芳烃,而浓度水平为1.8至11.4毫克克?1 OC(多环芳烃的总和)。诊断比率与来自参考文献的比率一致的,但不足以区分树林的物种。关于同位素方法,PAH分子同位素组成特定于每个物种和违背分子指纹,δ13C的显著变化观察多环芳烃的面板。这一工作,实现差异化的木材燃烧(与δ13CPAH=?28.7至?26.6)从颗粒物等的起源(如汽车废气)使用同位素测量,但也印证了必要的调查在发射源特性,以帮助和完整的源评估楷模。这些对woodburnings第一的成绩将是同位素方法源跟踪有用。

著录项

获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号