...
首页> 外文期刊>Scientific reports. >Laboratory Study Phenomenon of Coal and Gas Outburst Based on a Mid-scale Simulation System
【24h】

Laboratory Study Phenomenon of Coal and Gas Outburst Based on a Mid-scale Simulation System

机译:基于中型仿真系统的煤气突出实验室研究现象

获取原文

摘要

Outburst simulation experiments facilitate understanding coal and gas outburst in underground mining. With the help of the mid-scale simulation system, a model based on similitude principle, coal seam sandwiched by roof and floor, was constructed to conduct an outburst experiment. It had a three-dimensional size of 1500?mm?×?600?mm?×?1000?mm with 0.5?MPa gas pressure. The experimental procedures include specimen preparation, moulding, sealing, gas charging and adsorption, and completion. The outburst process was investigated by analyzing the gas pressure variation, temperature variation, outburst propagation velocity, particle size of outburst coal and energy transformation. During the experiment, each gas charging was accompanied with gas pressure or temperature fluctuation because of coal behavior of gas adsorption-desorption. The outburst propagation velocity was 17.2?m/s, obtained by a mass-weighted calculation of velocities of outburst coal. The small-size coal particles have a higher desorption rate and tend to participate in outburst process. According to energy conservation law, the energy forms of the outburst included elastic strain energy (Esube/sub), gas expansion energy (Esubp/sub), internal energy of coal (ΔU), breakage work (Wsub1/sub), throwing out work (Wsub2/sub) and gas-flow loss energy (ΔE), and each was calculated respectively. Gas potential energy, including gas expansion energy and internal energy of coal, registered a larger percent and was far greater than the strain energy. And it can be the main factor influencing the occurrence of low-threshold outburst. The experimental system provides a feasible way to study the initiation and evolution of coal and gas outbursts.
机译:爆发仿真实验有助于了解地下采矿中的煤炭和天然气爆发。借助中型仿真系统,建造了一种基于类似主体原理的模型,由屋顶和地板夹着​​的煤层进行了突出实验。它的三维尺寸为1500?mm?××600?mm?×1000?mm,0.5°气压。实验程序包括样品制备,模塑,密封,气体充电和吸附,并完成。通过分析气体压力变化,温度变化,突出繁殖速度,爆发煤和能量变换的粒度来研究突出过程。在实验期间,由于气体吸附 - 解吸的煤行为,每个气体充电都伴随着气体压力或温度波动。突出繁殖速度为17.2μm/ s,通过大规模加权计算爆炸煤的速度来获得。小尺寸的煤颗粒具有更高的解吸速率并倾向于参与爆发过程。根据节能法,爆发的能量形式包括弹性应变能量(E E ),气体膨胀能量(E P ),煤的内部能量(ΔU) ,破损工作(W 1 ),抛出工作(W 2 )和气流损失能量(Δe),分别计算。气体势能,包括煤的气体膨胀能量和内部能量,百分之大,远远大于应变能量。并且它可以是影响低阈值突出的发生的主要因素。实验系统提供了一种可行的方式来研究煤炭和燃气爆发的启动和演变。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号