Iron ore deposits model using geoelectrical resistivity method with dipole-dipole array

摘要

Mining industry is an industry with very high risk (losses). In order that mining activities can be run well, then the potential of the Earth’s resources must be known for sure. one of the Earth’s resources of high economic value is the iron ore. Iron ore is rarely found in a free state in nature, it is usually associated with other minerals and exposed randomly. With these properties, iron ore needs to be modeled before doing mining activities in order to avoid large losses. Iron ore deposits can be modeled with geoelectrical resistivity method. Dipole-dipole array will produce good imaging both vertically and laterally. From the measurement results of geoelectrical resistivity with dipole-dipole array will be obtained the value of measuring the current and potential difference. This value will generate into 2D and 3D model of the cross section of the iron ore deposits. One of the areas in West Sumatra has the potential for iron ore. Five lines were applied in this area. The result of cross section got the iron minerals associated with quartzite at 30 meters depth below the surface.