首页> 外文期刊>Journal of nanomaterials >Removal of Phosphate from Aqueous Solutions Using Chemically Synthesized Vaterite Polymorph of Porous Calcium Carbonate Nanoparticles under Optimized Conditions
【24h】

Removal of Phosphate from Aqueous Solutions Using Chemically Synthesized Vaterite Polymorph of Porous Calcium Carbonate Nanoparticles under Optimized Conditions

机译:在优化条件下,使用化学合成的多孔碳酸钙纳米粒子的化学合成Vaterite多晶型物从水溶液中除去磷酸盐

获取原文
           

摘要

Eutrophication is one of the most adverse impacts of nutrient contamination of water bodies where the phosphate is considered to be the primary limiting factor. The vaterite polymorph of porous calcium carbonate nanoparticles (VPCCNPs) were synthesized and used to remove orthophosphate ions in water. In this study, the VPCCNPs were synthesized chemically, using calcium acetate and sodium bicarbonate in a water-ethylene glycol media, at a temperature of 100°C, in a reaction time of 24 hours. Synthesized nanoparticles were characterized by X-ray diffractometry to confirm that the crystalline phase of calcium carbonate formed is spherical vaterite polymorph. Scanning electron microscopy coupled with energy dispersive X-ray analysis further confirms the spherical shape of the vaterite nanoparticles and the presence of only calcium, carbon, and oxygen thus showing high purity of the synthesized calcium carbonate nanoparticles. The dynamic laser light scattering-based particle size analysis (DLS) shows the average particle size to be 25.5?nm. The Fourier transform infrared spectroscopy was used to find functional groups before and after the adsorption of phosphate by vaterite nanoparticles. The phosphate removal efficiency of synthesized nanoparticles was tested with different concentrations of phosphate solutions (2–80?mg/L), pH levels (5–12), adsorbent dosages (0.025–0.250?g), and contact times (5–120?min). Ion chromatography was used to analyse the phosphate concentrations in water samples. The maximum phosphate removal percentage of 100% was obtained with 50?mL of 2?mg/L phosphate solution and 0.15?g of the synthesized nanoparticle. Adsorption data were well fitted with the Langmuir adsorption isotherm model and the pseudo-second-order kinetic model with R2 of 0.99 and 0.98 (rate constant -0.083?g?g-1?min-1), respectively. The presence of F?, NO3?, and SO42? has no effect on phosphate adsorption since 100% phosphate removal is obtained in the presence of these ions. Furthermore, the particle shows a 100% removal of orthophosphate ions available in eutrophic water regardless of the presence of many other ions in natural water bodies. The study presents a viable option for removing excess phosphate in natural water to desirable levels as a means for controlling eutrophication.
机译:富营养化是水体营养污染的最不良影响之一,其中磷酸盐被认为是主要限制因子。合成多孔碳酸钙纳米颗粒(VPCCNP)的Vaterite多晶型物,并用于在水中除去正磷酸盐离子。在该研究中,在水 - 乙二醇介质中使用乙酸钙和碳酸氢钠在100℃的温度下,在24小时的反应时间内使用乙酸钙和碳酸氢钠合成VPCCNP。通过X射线衍射特征合成纳米颗粒以确认所形成的碳酸钙的结晶相是球形Vaterite多晶硅。扫描电子显微镜与能量分散X射线分析相结合,进一步证实了Vaterite纳米颗粒的球形形状和仅存在钙,碳和氧的存在,因此显示出合成的碳酸钙纳米粒子的高纯度。基于动态激光散射的粒度分析(DLS)显示平均粒度为25.5μm。傅里叶变换红外光谱法用于通过Vaterite纳米颗粒吸附磷酸盐前后的官能团。用不同浓度的磷酸盐溶液(2-80×mg / L),pH水平(5-12),吸附剂剂量(0.025-0.250μm)和接触时间(5-120次)测试合成纳米颗粒的磷酸盐去除效率?分钟)。离子色谱法用于分析水样中的磷酸盐浓度。用50μl2·mg / L磷酸盐溶液和0.15·合成纳米颗粒获得的最大磷酸盐去除率100%。吸附数据与Langmuir吸附等温线和伪二阶动力学模型合适,分别具有0.99和0.98(速率-0.083Ω·G?G-1?MIN-1)的伪二阶动力学模型。 f?,no3?,so42?由于在这些离子存在下获得100%磷酸盐去除,因此在这些离子存在下获得磷酸盐吸附没有影响。此外,颗粒显示出在富营养化中可用的100%除去富营养化的离子磷酸盐离子,而不管天然水体中还有许多其他离子的存在。该研究提出了一种可行的选择,用于将多余的磷酸盐除去天然水中的过量磷酸盐,以控制富营养化的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号