Analysis of Cellulose Pulp Characteristics and Processing Parameters for Efficient Paper Production

摘要

For economic reasons, increasing the use of various fibrous pulps with high lignin contents—i.e., chemothermomechanical pulp (BCTMP and CTMP), thermomechanical pulp (TMP), and semichemical pulp—is desirable. The relatively good quality and increased efficiency of these pulps make them attractive paper semi-products. In particular, they could alleviate the severe shortage of paper semi-products. Although mechanical pulp and semichemical pulp are achieving increasing quality with substantially increased wood efficiency, their production is often characterised by high consumption of electricity to defibre chips or refine high-lignin-content fibrous pulps. Technological, environmental, and economic evaluations of the manufacture and application of increased efficiency cellulose pulps that take into account potential profits from increased cellulose pulp efficiency and losses due to energy costs and degradation in the properties of the resulting paper are relevant and essential to paper mills. This article reports such an analysis. The authors have analysed the usable properties of ten cellulose pulps with various degrees of digestion and identified the optimum pulp that yields the optimum product properties, considering the yield; pulp refining time, which determines the cost of paper manufacture; and strength properties of the obtained paper.