...
首页> 外文期刊>Orthopaedic Journal of Sports Medicine >Biomechanical Comparison of Augmentation of Engineered Tendon-Fibrocartilage-Bone Composite With Acellular Dermal Graft Using Double Rip-Stop Technique for Canine Rotator Cuff Repair
【24h】

Biomechanical Comparison of Augmentation of Engineered Tendon-Fibrocartilage-Bone Composite With Acellular Dermal Graft Using Double Rip-Stop Technique for Canine Rotator Cuff Repair

机译:用双裂止动技术对犬皮下防滑纤维移植工艺肌腱纤维纤维化骨复合材料的生物力学比较

获取原文

摘要

Background: The retear rate after rotator cuff repair remains unacceptably high. Various biological engineered scaffolds have been proposed to reduce the retear rate. We have developed a double rip-stop repair with medial row knot (DRSK) technique to enhance suture-tendon strength and a novel engineered tendon-fibrocartilage-bone composite (TFBC) for rotator cuff repair. Hypothesis: DRSK rotator cuff repair augmented with TFBC will have better biomechanical properties than that of DRSK repair with an acellular dermal graft (DG). Study Design: Controlled laboratory study. Methods: Fresh-frozen canine shoulders (n = 30) and knees (n = 10) were used. TFBCs were harvested from the patellar tendon–tibia complex and prepared for rotator cuff repair. The infraspinatus tendon was sharply detached from its bony attachment and randomly assigned to the (1) control group: DRSK repair alone, (2) TFBC group: DRSK repair with TFBC, and (3) DG group: DRSK repair with DG. All specimens were tested to failure, and videos were recorded. The footprint area, tendon thickness, load to create 3-mm gap formation, failure load, failure modes, and stiffness were recorded and compared. Data were recorded as mean ± SD. Results: The mean load to create a 3-mm gap in both the control group (206.8 ± 55.7 N) and TFBC group (208.9 ± 39.1 N) was significantly higher than that in the DG group (157.7 ± 52.3 N) ( P & .05 for all). The failure load of the control group (275.7 ± 75.0 N) and TFBC group (275.2 ± 52.5 N) was significantly higher compared with the DG group (201.5 ± 49.7 N) ( P & .05 for both comparisons). The stiffness of the control group (26.4 ± 4.7 N/mm) was significantly higher than of the TFBC group (20.4 ± 4.4 N/mm) and the DG group (21.1 ± 4.8 N/mm) ( P & .05 for both comparisons). Conclusion: TFBC augmentation showed superior biomechanical performance to DG augmentation in rotator cuff tears repaired using the DRSK technique, while there was no difference between the TFBC and control groups. Clinical Relevance: TFBC may help to reduce retear or gap formation after rotator cuff repair using the DRSK technique.
机译:背景:转子袖带修复后的固定速率保持不可接受。已经提出了各种生物工程支架以降低固量值。我们开发了一种双重rip-stop修复,用中间行结(DRSK)技术来增强缝合肌腱强度和用于转子袖带修复的新型工程肌腱 - 纤维纤维 - 骨复合材料(TFBC)。假设:用TFBC增强DRSK转子袖带修复将具有比DRSK修复与无细胞皮肤移植物(DG)具有更好的生物力学性质。研究设计:受控实验室研究。方法:使用新鲜冷冻犬肩部(n = 30)和膝关节(n = 10)。从髌骨肌腱 - 胫骨复合物中收获TFBC,并为旋转箍修复准备。从其骨骼附件中急剧脱离,随机分配给(1)对照组:DRSK修复单独,(2)TFBC组:DRSK修复与TFBC,(3)DG组:DG DG的DRSK修复。所有标本都经过测试到故障,并记录视频。记录脚印面积,肌腱厚度,载荷以产生3毫米间隙形成,故障负载,故障模式和刚度。数据被记录为平均值±SD。结果:在对照组(206.8±55.7 n)和TFBC组(208.9±39.1n)中产生3毫米间隙的平均载荷显着高于DG组(157.7±52.3 n)(p&lt全部; 05)。与DG组相比(201.5±49.7 n)相比,对照组(275.7±75.0n)和TFBC组(275.2±52.5 n)的破坏载荷显着高于(P <5.05的比较)。对照组的刚度(26.4±4.7n / mm)显着高于TFBC组(20.4±4.4n / mm)和DG组(21.1±4.8n / mm)(两个都是两者的p <.05比较)。结论:TFBC增强显示使用DRSK技术修复的转子袖口撕裂中的DG增强卓越的生物力学性能,而TFBC和对照组之间没有差异。临床相关性:TFBC可能有助于使用DRSK技术在旋转箍修复后减小固定或间隙形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号