...
首页> 外文期刊>Orthopaedic Journal of Sports Medicine >Measurement of Tibial Tuberosity–Trochlear Groove Offset Distance by Weightbearing Cone-Beam Computed Tomography Scan
【24h】

Measurement of Tibial Tuberosity–Trochlear Groove Offset Distance by Weightbearing Cone-Beam Computed Tomography Scan

机译:测量胫骨结节 - 桁闸槽偏移距离通过衔接锥形光束计算机断层扫描扫描

获取原文
   

获取外文期刊封面封底 >>

       

摘要

Background:Computed tomography (CT) scans are useful for objectively measuring bone alignment because they show bone detail particularly well, and these scans have been used extensively to assess patellar orientation. The tibial tubercle–trochlear groove (TT-TG) offset distance has been shown to be influenced by knee flexion and weightbearing, yet conventional CT scans are obtained with the subject relaxed, supine, and with the knee in full extension. A new cone-beam CT scanner has been designed to allow for weightbearing images, potentially providing a more physiologically relevant assessment of patellofemoral alignment.Purpose/Hypothesis:The purpose of this study was to measure the TT-TG offset in healthy individuals without any history of knee complaints when CT scans were obtained while fully weightbearing on a flexed knee. Our hypothesis was that the TT-TG offset measurement in these healthy knees would be reproducible and less than the historically reported normal range.Study Design:Cross-sectional study; Level of evidence, 3.Methods:Twenty healthy volunteers without any history of knee complaint were recruited to undergo a weightbearing cone-beam CT scan of the knee flexed at 30°. The scans were reviewed by a radiologist and an orthopaedic surgeon, and TT-TG offset was measured using the digital tools of a picture archiving and communication system. Paired t tests were used to compare TT-TG offset on 2 separate occasions for both raters. Inter- and intrarater reliability were assessed using a 2-way mixed-effects model intraclass correlation coefficient with corresponding 95% confidence intervals for TT-TG offset.Results:The mean TT-TG offset was 2.7 mm. There were no statistically significant differences in TT-TG offset between raters (Prater1 = .70; Prater2 = .49) and time of read (Ptime1 = .83; Ptime2 = .19). Good to moderate interrater reliability was found at the time of both reads, and good intrarater reliability was found for both raters.Conclusion:When measured by CT scan and obtained from a subject while weightbearing on a flexed knee, the TT-TG offset is reproducible and the distance is less than that obtained via a conventional CT scan.
机译:背景:计算机断层扫描(CT)扫描可用于客观地测量骨骼对准,因为它们特别良好地显示骨细节,并且这些扫描已被广泛用于评估髌骨方向。已经显示胫骨结节螺纹槽(TT-Tg)偏移距离受到膝关节屈曲和延伸的影响,但是通过对象放松,仰卧,膝关节和膝关节以完全延伸,获得传统的CT扫描。设计了一种新的锥形光束CT扫描仪,允许允许举重图像,可能提供更具生理学上相关的对髌户对准的评估。本研究的目的是在没有任何历史的情况下测量健康个体中的TT-TG偏移量膝关节投诉在获得CT扫描时,同时在弯曲的膝盖上完全重要。我们的假设是,这些健康膝盖中的TT-TG偏移测量将是可重复的,并且少于历史上报告的正常范围。研究:横截面研究;证据级别,3.方法:没有任何膝关节诉讼历史的20个健康的志愿者被招募一个膝盖的膝盖弯曲的锥形锥形梁CT扫描。扫描由放射科医生和矫形外科医生进行审查,使用图片归档和通信系统的数字工具测量TT-TG偏移。配对的T测试用于将TT-TG偏移比较2个单独场合进行比较。使用双向混合效应模型进行评估和内部可靠性,其中腹部相关系数具有相应的95%置信区间,用于TT-TG偏移。结果:平均TT-TG偏移量为2.7毫米。在评级者之间没有统计学上显着的差异(prater1 = .70; prater2 = .49)和读取时间(ptime1 = .83; ptime2 = .19)。在读取时发现适度的中间接管室可靠性,并且针对两种评估者发现了良好的内部可靠性。结论:当通过CT扫描测量并从弯曲的膝关节施加屈膝时从对象获得时,TT-Tg偏移是可重复的并且距离小于通过传统CT扫描获得的距离。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号